Need help?Do you have a question about the EcoWater 500 Series and is the answer not in the manual?
General| Type | Water Softener |
|---|---|
| Regeneration Type | Demand Initiated Regeneration (DIR) |
| Controller | Electronic |
| Salt Efficiency | Up to 4, 000 grains per pound of salt |
| Power Supply | 120V AC |
Steps for unpacking the water softener and checking for damage upon arrival.
Crucial safety instructions and precautions for installation and operation of the water softener.
Guidelines for choosing an optimal installation site for the water softener.
Instructions for attaching and correctly routing the valve drain hose.
Guides on adding water and salt to the brine tank before operation.
Instructions on how to initiate the water softener's recharge cycle.
Steps for setting time, day, recharge time, and days for the solid state timer.
How to manually initiate an immediate recharge cycle for the solid state timer.
Steps for setting model code, time, hardness, and recharge time for the electronic timer.
How to set the scheduled time for regeneration on the electronic timer.
Covers Recharge Now, Tonight, Program Memory, and Average Daily Gallons options.
Explains the function of the water meter and electronic timer for demand-based operation.
Describes the normal service cycle and the need for regeneration.
Explains the cleaning process for the water softener's resin bed.
Covers salt refilling, salt bridge issues, and nozzle/venturi cleaning procedures.
Covers regeneration cycles, diagnostics, and initial troubleshooting checks.
Details wiring diagrams and face plate replacement procedures for timer models.
Covers troubleshooting steps and diagnostics for electronic demand timer models.
Procedures for manual diagnostics on electronic timers.
Covers disassembly, servicing, and assembly of the rotary valve components.
To Next Page