EcoWater ESM9CE+ - Setting the Current Time; Setting the Language; Setting Hardness; Setting Iron Level

6
SETTING IRON LEVEL
Normally done during setup.
To change it:
1. Press SELECT (¡) to go
to the Main menu.
2. Go to Basic settings
screen.
3. Go to Iron level screen.
4. Press DOWN (6) or UP
(5) to set the value for
iron in your water.
3 grains = 1ppm
of clear water iron
5. Press SELECT (¡), then
press LEFT (3) several
times to return to the
status screens.
SETTING HARDNESS
Normally done during setup.
To change it:
1. Press SELECT (¡) to go
to the Main menu.
2. Go to Basic settings
screen.
3. Go to Hardness screen.
4. Press DOWN (6) or UP
(5) to set your water’s
hardness.
Conversions:
1 grain = 1°dH
10 ppm = 1°f
5. Press SELECT (¡), then
press LEFT (3) several
times to return to the
status screens.
SETTING THE LANGUAGE
Normally done during setup.
To change it:
1. Press SELECT (¡) to go
to the Main menu.
2. Go to User preferences
screen.
3. Go to Language screen.
4. Press DOWN (6) or UP
(5) to scroll to the
desired language. The
choices are: English,
Spanish, French, Italian,
German, Dutch, Polish,
Russian, Hungarian,
Turkish, Lithuanian,
Greek or Romanian.
5. Press SELECT (¡)
twice, then press LEFT
(3) several times to return to the status screens.
SETTING THE CURRENT TIME
Normally done during setup.
To change it:
1. Press SELECT (¡) to go
to the Main menu.
2. Go to Basic settings
screen.
3. Go to Current time
screen.
4. Press DOWN (6) or UP
(5) to set the current
time. Hold button to go
faster.
5. Press SELECT (¡), then
press LEFT (3) several
times to return to the
status screens.
NOTE: Do not increase the hardness setting to
compensate for iron in your water. The
electronic control compensates automatically
after you set the iron level (see below).
TO RESET TO YOUR NATIVE LANGUAGE
IF ANOTHER LANGUAGE IS DISPLAYED:
From the status screens, press SELECT (¡).
Press the DOWN (6) button three times, then
press SELECT (¡) twice. Press DOWN (6) or UP
(5) to scroll to your native language (see list
below), then press SELECT (¡) twice. Press LEFT
(3) twice to exit all menus.
Languages are listed in this order: English, Spanish,
French, Italian, German, Dutch, Polish, Russian,
Hungarian, Turkish, Lithuanian, Greek, Romanian.
Conditioner/Refiner Programming
ECOWATER
S Y S T E M S
English