EcoWater ESM9CE+ - Page 15

15
MODIFYING ROLLING SCREENS
During normal conditioner/refiner operation, four status
screens are shown in sequence (See “Conditioner/
Refiner Status Screens” on Page 9). When the condi-
tioner/refiner’s electronic control is first powered up, the
default is to show all four. You can turn on/off individual
screens*:
1. From any of the rolling status screens, press the
SELECT (¡) button to display the Main menu.
2. Press the DOWN (6) button to scroll through the
menu options until Basic settings is highlighted
(See Figure 44).
3. Press the SELECT (¡) button to display the Basic
settings menu (See Figure 45).
FIG. 44
FIG. 45
4. Press the DOWN (6) button to scroll through the
menu options until Rolling screens is highlighted.
5. Press the SELECT (¡) button to display the Rolling
screens menu (See Figure 46).
FIG. 46
6. Press the DOWN (6) or UP (5) buttons to scroll
through the list. Items with a black square next to
them will be displayed during normal operation.
7. To un-select a screen, make sure its name is high-
lighted in a box. Then press the SELECT (¡) button.
The black square will disappear. Pressing SELECT
(¡) again makes the black square reappear and re-
selects the highlighted item. At least one screen
must be selected/highlighted.
8. When selections are complete, exit this menu by
pressing the LEFT (3) button. The display will go
back to the Basic settings menu (Figure 45).
9. Press the LEFT (3) button twice to return to the
rolling status screens.
*
This does not include service reminders, errors, alerts or
Recharge status screens.
SETTING THE LANGUAGE
When the conditioner/refiner’s electronic control is first
powered up, a “wizard” screen prompts you to set the
language (See Page 8). Language is set independently
on the conditioner/refiner and remote (See Page 27 to
set the remote’s language). To change the conditioner/
refiner’s language:
1. From any of the rolling status screens, press the
SELECT (¡) button to display the Main menu.
2. Press the DOWN (6) button to scroll through the
menu options until User preferences is highlighted
(See Figure 47).
4. Make sure Language is highlighted.
5. Press the SELECT (¡) button to display the
Language menu (See Figure 49).
FIG. 47
FIG. 48
3. Press the SELECT (¡) button to display the User
preferences menu (See Figure 48).
FIG. 49
6. If the desired language already has a black dot next
to it (See Figure 49), go to Step 7. Otherwise, press
the DOWN (6) or UP (5) buttons to scroll to the
desired language, then press SELECT (¡) to choose
it. The choices are: English, Spanish, French, Italian,
German, Dutch, Polish, Russian, Hungarian, Turkish,
Lithuanian, Greek or Romanian.
7. Press the SELECT (¡) button. The display will go
back to the User preferences menu (Figure 48).
8. Press the LEFT (3) button twice to return to the
rolling status screens.
TO SET THE CONDITIONER/REFINER TO ENG-
LISH IF ANOTHER LANGUAGE IS DISPLAYED:
From the rolling status screens, press SELECT (¡).
Press DOWN (6) three times, then press SELECT
(¡) twice. Press UP (5) to scroll to English at the
top of the list, then press SELECT (¡) twice. Press
LEFT (3) twice to exit all menus.
ECOWATER
S Y S T E M S
Conditioner/Refiner Operation