8 Maintenance
The following steps should be taken for proper maintenance of your station
1. Clean the rain gauge once every 3 months. Rotate the funnel
counter-clockwise and lift to expose the rain gauge mechanism, and
clean with a damp cloth. Remove any dirt, debris and insects. If bug
infestation is an issue, spray the array lightly with insecticide.
Figure: Rain gauge installation and maintenance
2. Clean the solar radiation sensor and solar panel every 3 months with a
non-abrasive slightly damp cloth.
3. Replace batteries every 1-2 years. If left in too long, the batteries may
leak due to environmental challenges. In harsh environments, inspect
the batteries every 3 months (while cleaning the solar panel).
To Next Page
Loading...
