EcoxGear EcoBoulder User Manual

Operations
Listening(AM/FM mode)
Press briefly to switch to FM or AM. Also, you can
press briefly to set the tuner to FM or AM cyclically.Press
to tune in a radio station. To “seek”(jump to the next
available station), press and hold either button down for a few
seconds until it starts to seek a station.
a
a Press
to adjust the volume.
AM/FM Presets
Store a favorite radio station and quickly tune to a preset radio
station. There are 6 positions for AM station and 6 positions
for FM stations.
1.
Press and hold a preset button(P1~P6) to assign the current
station to that preset number. The LCD will flash 2 times to
indicate it has been set.
If you want to use an added preset, press a preset
button(P1~P6) to go to the stored radio station.
You can store the station you like, follow this
steps:
You should be listening to the station you want to store.
2.
17

EcoxGear EcoBoulder Specifications

General

Bluetooth Compliance	Bluetooth V 4.0
Frequency Band	2.402~2.480GHz ISM Spectrum
Modulation	GFSK, π/4-DQPSK, 8DPSK
Operating Range	Up to 10m (indoor)
Link	TrueWireless Stereo (TWS)
Link Range	30' (9.1 m) from left to right speaker
Radio Frequency Range	US: AM 520 - 1710 kHz, FM 87.5 - 107.9 kHz
Tweeter	3 '' (76.2mm) tweeter
Woofer	8 '' (203.2mm) woofer
Output Power	50 W (peak)
Power Supply	Input voltage: 100-240V~50/60Hz
Battery Capacity	12V, 7.0Ah
Charging Time	About 10 hours
Compatibility	Mobile phone/device supporting Bluetooth V1.1 (and above)

Weight and Dimensions

Size	504mm393mm287mm