10
Operations
Power On/Off
Power On: PRESS AND HOLD for 3 seconds to power on the EcoTrek.
“Speaker on, ready to connect” voice prompt will be heard.
Power Off: PRESS AND HOLD for 3 seconds to power off
the EcoTrek.
Inactivity Auto-Power off: If either no music is played while it is in
Bluetooth mode or if an Aux In cable is not plugged in while it is in AUX
mode for 30 minutes, the EcoTrek will automatically power off to save
power. Your EcoTrek will not automatically power off after 30 minutes of
inactivity if it is plugged into an AC outlet.
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on EcoTrek. “Speaker on, ready to connect” voice prompt
will be heard. If already powered on and not in Bluetooth mode, press
SOURCE until it is in Bluetooth mode. (If Bluetooth icon on LED screen
is not flashing, briefly press to start pairing your device.)
3. Navigate to your Bluetooth device’s setup screen, find ECOXGEAR
and connect. If the connection is successful, the Bluetooth icon will be
lit solid and your EcoTrek will announce “Connection successful.”
To Next Page
Loading...
Need help?
General