28
Using BIOS
Standard CMOS Setup
This option displays basic information about your system.
Standard CMOS Setup
f
f
f
f
f
f
Item Help
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system
Date.
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Date Tuet 12/05/2006
Time 17:26:11
Primary IDE Master Not Detected
Primary IDE Slave Not Detected
Secondary IDE Master Not Detected
Secondary IDE Slave ATAPI CDROM
S-ATA 1 Not Detected
S-ATA 2 Not Detected
IDE BusMaster Enabled
Drive A: 1.44 MB 3 1/2”
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Date and Time
The Date and Time items show the current date and time on the computer. If
you are running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
Primary/Secondary IDE Master/Slave, S-ATA 1~2
Your computer has two IDE channels and each channel can be installed with one or
two devices (Master and Slave). In addition, this motherboard supports two SATA
channels and each channel allows one SATA device to be installed. Use these items
to configure each device on the IDE channel.
This item enables or disables the DMA under DOS mode. We recommend you to
leave this item at the default value.
Drive A (1.44 MB 3 1/2”)
This item sets up size and capacity of the floppy diskette drive(s) installed in the
system.
Press <Esc> to return to the main menu page.
IDE BusMaster (Enabled)
To Next Page
Loading...
Need help?
General
