ECS 662/1066T-M2 - PC Health Status

35
Using BIOS
PC Health Status
On motherboards that support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
mnlk
Item Help
f
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
PC Health Status
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Hardware Health Event Monitoring
Smart Fan Function Press Enter
Shutdown Temperature Disabled
CPU Temperature : 20
o
C/68
o
F
System Temperature : 25
o
C/77
o
F
CPU Fan Speed : 2596 RPM
System Fan Speed : 0 RPM
CPU Vcore : 1.232 V
VDIMM : 1.824 V
Shutdown Temperature (Disabled)
Enables you to set the maximum temperature the system can reach before powering down.
System Component Characteristics
These fields provide you with information about the systems current operating status. You
cannot make changes to these fields.
• CPU Temperature
• System Temperature
• CPU Fan Speed
• System Fan Speed
• CPU Vcore
• VDIMM
Smart Fan Function (Press Enter)
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
Smart Fan Function
Scroll to this item and press <Enter> to view the following screen:
Item Help
CPU SMART FAN Control
Options
Disabled
Enabled
Disabled
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
mnlk
Press <Esc> to return to the PC Health Status page.
This item allows users to enable or disable smart fan control function.
CPU SMART FAN Control (Disabled)