29
Using BIOS
Advanced Setup
This option defines advanced information about your system.
Item Help
Advanced Setup
CMOS Setup Utility – Copyright (C) 1985-2005, American Megatrends, Inc.
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Thermal Management
TM Status
Limit CPUID MaxVal
Enhanced Halt (C1E)
Intel XD Bit
Intel EIST
Quick Power on Self Test
Boot Up Numlock Status
APIC Mode
Ist Boot Device
2nd Boot Device
3rd Boot Device
Removable Drives
CD/DVD Drives
Boot Other Device
Enabled
TM1
Disabled
Enabled
Disabled
Automatic
Enabled
On
Enabled
Hard Drive
Pioneer DVD-ROM ATA
1st FLOPPY DRIVE
Press Enter
Press Enter
Ye s
For the processor its CPUID
belows 0F41h.
TM2 only can be enable
under below setting.
1. Freq. >=3.6GHz FSB800
2. Freq. >=2.8GHz FSB533
Thermal Management (Enabled)
This item displays CPU’s temperature and enables you to set a safe temperature to
Prescott CPU.
• TM Status (TM1): This item displays CPU Monitor status.
Enhanced Halt (CE1) (Enabled)
This item enables or disables enhanced halt.
Intel XD Bit (Disabled)
This item allows users to enable or disable the Intel XD bit.
Intel EIST (Automatic)
This item allows users to enbale or disable the EIST(Enhanced Intel SpeedStep Technol-
ogy.
Quick Power On Self Test (Enabled)
Enable this item to shorten the power on self testing (POST) and have your system start
up faster. You might like to enable this item after you confident that your system
hardware is operating smoothly.
Boot Up NumLock Status (On)
This item determines if the NumLock key is active or inactive at system start-up time.
Limit CPUID MaxVal (Disabled)
This item can support Prescott CPUs for old OS. Users please note that under NT 4.0, it
must be set “Enabled”, while under WinXP, it must be set “Disabled”
To Next Page
Loading...
Need help?
General
