ECS 662/1066T-M2 User Manual

51
SiS964 SATA RAID Setup Guide
6 Press <Q> again to exit this BIOS utility and the red message frame will show
as the same age as the creation of the RAID 0 array. Press <Y> and <Enter>
to save changes.
7 Once the array has been created, you will need to FDISK and format the array
as if it were a new single hard drive.
This concludes Chapter 5.

ECS 662/1066T-M2 Specifications

General

Brand	ECS
Model	662/1066T-M2
Category	Motherboard
Language	English