28
Using BIOS
Press the delete key to access the BIOS Setup Utility.
CMOS Setup Utility -- Copyright (C) 1985-2005, American Megatrends, Inc.
f
f
f
f
v02.58 (C)Copyright 1985-2004, American Mega trends, Inc.
f
: Move F10: Save and Exit
+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
f
f
f
Standard CMOS Setup
Advanced Setup
Advanced Chipset Setup
Integrated Peripherals
Power Management Setup
PCI/PnP Configuration
PC Health Status
Frequency/Voltage Control
Load Optimal Defaults
Supervisor Password
User Password
Save & Exit Setup
Exit Without Saving
f
f
mnlk
ESC: Exit
BIOS Navigation Keys
The BIOS navigation keys are listed below:
Enter Select
KEY FUNCTION
Scrolls through the items on a menu
+/-/PU/PD Modifies the selected field’s values
F10 Saves the current configuration and exits setup
F1 Displays a screen that describes all key functions
F9 Loads an optimized setting for better performance
ESC Exits the current menu
mnlk
Using BIOS
When you start the Setup Utility, the main menu appears. The main menu of the Setup
Utility displays a list of the options that are available. A highlight indicates which option is
currently selected. Use the cursor arrow keys to move the highlight to other options. When
an option is highlighted, execute the option by pressing <Enter>.
Some options lead to pop-up dialog boxes that prompt you to verify that you wish to
execute that option. Other options lead to dialog boxes that prompt you for information.
Some options (marked with a triangle
ff
ff
f) lead to submenus that enable you to change the
values for the option. Use the cursor arrow keys to scroll through the items in the submenu.
In this manual, default values are enclosed in parenthesis. Submenu items are denoted by a
triangle
ff
ff
f .
The default BIOS setting for this motherboard applies for most conditions with
optimum performance. It is not suggested to change the default values in the
BIOS setup and the manufacture takes no responsibility to any damage caused
by changing the BIOS settings.
To Next Page
Loading...
Need help?
General
