29
Using BIOS
Standard CMOS Setup
This option displays basic information about your system.
System Date Sun 01/01/2006
f
Primary IDE Master Not Detected
Primary IDE Slave Not Detected
Secondary IDE Master Not Detected
Secondary IDE Slave Not Detected
Help Item
f
f
f
CMOS Setup Utility -- Copyright (C) 1985-2005, American Megatrends, Inc.
System Time 04 : 09 : 48
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
IDE BusMaster Enabled
Standard CMOS Setup
System Date & System Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make changes
to the Windows Date and Time Properties utility.
IDE Devices
f
Your computer has one IDE channel which can be installed with one or two devices (Master
and Slave). In addition, this motherboard supports two SATA channels and each channel
allows one SATA device to be installed. Use these items to configure each device on the IDE
channel.
Third IDE Master Hard Disk
Third IDE Slave ATAPI CDROM
f
f
Floppy A 1.44 MB 3
1
/
2
”
CMOS SETUP UTILITY – Copyright (C) 1985-2005, American Megatrends, Inc.
Primary IDE Master
Primary IDE Master
Type Auto
LBA/Large Mode Auto
Block (Multi-Sector Transfer) Auto
PIO Mode Auto
DMA Mode Auto
S.M.A.R.T Auto
32Bit Data Transfer Disabled
Help Item
Select the type
of device connected
to the system.
Device : Not Detected
mnlk
: Move
F10: Save and Exit
Enter : Select
+/-/: Value
F9: Optimized Defaults ESC: Exit
F1: General Help
mnlk
: Move
F10: Save and Exit
Enter : Select
+/-/: Value
F9: Optimized Defaults ESC: Exit
F1: General Help
For the purpose of better product maintenance, the manufacture reserves the
right to change the BIOS items presented in this manual. The BIOS setup screens
shown in this chapter are for reference only and may differ from the actual BIOS.
Please visit the manufacture’s website for updated manual.
To Next Page
Loading...
Need help?
General
