33
Using BIOS
Advanced Chipset Setup
This page sets up more advanced information about your system. Handle this page with
caution. Any changes can affect the operation of your computer.
Configure DRAM Timing (By SPD)
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded in SPD
during system boot up.
Aperature Size Select (128MB)
This item defines the size of the aperture if you use an AGP graphics adapter. The AGP
aperture refers to a section of the PCI memory address range used for graphics memory that
you leave this item at the default value.
Share Memory Size (Enabled, 8MB)
This item lets you allocate a portion of the main memory for the onboard VGA display
application.
Press <Esc> to return to the main menu setting page.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Chipset Setup
Configure DRAM Timing By SPD
Aperture Size Select 128MB
Share Memory Size Enabled, 8MB
Help Item
Options
Disabled
By SPD
Case Open Warning (Disabled)
This item enables or disables
the warning if the case is opened up, and the item below
indicates the current status of the case.
Press <Esc> to return to the main menu setting page.
Boot Other Device (Enabled)
When enabled, the system searches all other possible locations for an operating system if
it fails to find one in the devices specified under the First, Second and Third boot devices.
Press <Esc> to return to the Advanced Setup page.
F10: Save and Exit+/-/: Value
Enter : Select
ESC: Exit
F9: Optimized Defaults
F1:General Help
: Move
mnlk
To Next Page
Loading...
Need help?
General
