EasyManuals Logo

ECS A75F-M2 User Manual

ECS A75F-M2
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
68
Trouble Shooting
Your computer, like any electrical appliance, requires proper care and maintenance.
Here are some basic PC care tips to help prolong the life of the motherboard and
keep it running as best as it can.
Start up problems after prolong use
After a prolong period of use your PC may experience start up problems again.
This may be caused by breakdown of devices connected to the motherboard such as
HDD, CPU fan, etc. The following tips may help to revive the PC or identify the
cause of failure.
1. Clear the CMOS values using the CLR_CMOS jumper. Refer to CLR_CMOS
jumper in Chapter 2 for Checking Jumper Settings in this user manual. When
completed, follow up with a Load Optimised Default in the BIOS setup.
2. Check the CPU cooler fan for dust. Long term accumulation of dust will reduce
its effectiveness to cool the processor. Clean the cooler or replace a new one if
necessary.
3. Check that the 12V power & ATX connectors are fully inserted into the
motherboard connectors. Make sure the latches of the cable and connector are
locked into place.
4. Remove the hard drive, optical drive or DDR memory to determine which of
these components may be at fault.
Maintenance and care tips
2. From the BIOS setting, try to disable the Smartfan function to let the fan run at
default speed. Doing a Load Optimised Default will also disable the Smartfan.
1. Keep your computer in a well ventilated area. Leave some space between the PC
and the wall for sufficient airflow.
2. Keep your computer in a cool dry place. Avoid dusty areas, direct sunlight and areas
of high moisture content.
3. Routinely clean the CPU cooler fan to remove dust and hair.
4. In places of hot and humid weather you should turn on your computer once every
other week to circulate the air and prevent damage from humility.
5. Add more memory to your computer if possible. This not only speeds up the system
but also reduces the loading of your hard drive to prolong its life span.
6. If possible, ensure the power cord has an earth ground pin directly from the wall
outlet. This will reduce voltage fluctuation that may damage sensitive devices.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ECS A75F-M2 and is the answer not in the manual?

ECS A75F-M2 Specifications

General IconGeneral
Memory channelsDual-channel
Number of memory slots2
Maximum internal memory16 GB
Supported memory clock speeds1333, 1600, 1866 MHz
Processor socketSocket FM1
Processor manufacturerAMD
Compatible processor seriesAMD Athlon FX, AMD Athlon II X2, AMD Athlon II X3, AMD Athlon II X4, AMD Athlon X2, AMD Athlon X2 Dual-Core
S/PDIF out connectorYes
Number of SATA III connectors6
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Firewire (IEEE 1394) ports0
BIOS typeAMI
Component forPC
Power source typeATX
Motherboard chipsetAMD A75
Audio output channels6.1 channels
Motherboard form factormicro ATX
Compatible operating systemsWindows 7
On-board graphics cardNo
Parallel processing technology supportNot supported
LAN controllerRealtek RTL8111E
Networking featuresGigabit Ethernet
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width240 mm

Related product manuals