31
Using BIOS
IDE BusMaster (Enabled)
This item enables or disables the DMA under DOS mode. We recommend you to leave
this item at the default value.
Drive A (1..44 MB 3
1
/
2
”)
This item defines the characteristics of any diskette drive attached to the system.
You can connect one or two diskette drives.
ATA(PI) 80Pin Cable Detect (Host)
Select the mechanism for detecting 80Pin ATA(PI) cable. The 80Pin cable is required
for UDMA-66 and above.
Press <Esc> to return to the main menu setting page.
To Next Page
Loading...
