35
Using BIOS
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Integrated Peripherals
Onboard IDE Controller Enabled
Help Item
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
mnlk
OnChip S-ATA Controller Enabled
SATA Mode Select SATA Mode
nVidia RAID Setup Press Enter
Legacy USB Support Enabled
USB Controller Enabled
Onboard AUDIO Function Auto
Onboard LAN Function Auto
Onboard LAN Boot ROM Disabled
Onboard Floppy Controller Enabled
f
Disabled
Enabled
Options
SATA Mode select (SATA Mode)
Use this item to select the mode of the Serial ATA.
OnBoard IDE Controller (Enabled)
Use this item to enable or disable the onboard IDE interface.
Onboard S-ATA Controller (Enabled)
This item allows you to enable or disable the onboard SATA controller.
nVidia RAID Setup (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
X
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
nVidia RAID Setup
RAID Setup
Help Item
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
mnlk
To Next Page
Loading...
Need help?
General
