ECS GF7100PVT-M3 - Page 44

38
Using BIOS
CPU SMART FAN Control (Enabled)
This item allows you to enable or disable the control of the CPU fan speed by
changing the CPU temperature.
Press <Esc> to return to the PC Health Status page.
ECS supports the latest PECI host technology. While using Wolfdale or
Yorkfield CPU, the original images of the BIOS item “PC Health Status”
and “Smart FAN Function” will be replaced by PECI mode and negative
number. (The max data from PECI is zero.)
Hardware Health Event Monitoring
Smart Fan Function Press Enter
System Temperature 33°C/91°F
CPU Fan Speed: 2537 RPM
CPU Vcore: 1.280V
VDIMM: 1.840V
-=- PECI Mode-=-
Offset to TCC Activation Temp.: -20
Help Item
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
PC Health Status
f
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
mnlk
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
Smart Fan Function
Help Item
CPU SMART FAN Control Enabled
SMART Fan Target Offset (-) 037
Tolerance Value 03
StartUp Value 102
Stop Value 051
StopTime Value 060
Disabled
Enabled
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
mnlk
Options