Chapter 3
H110I-C4P USER MANUAL
54
DllBwEn [0/1/2/3] (0/1/2/2)
Use these items to set the DllBwEn value.
Memory Frequency (2133)
This it
em shows the memory frequency.
Main Advanced Chipset Tweak Boot Security Exit
Enable, Disable (Enable=
Def)
+/- : Change Opt.
Enter/Dbl Click : Select
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
F9: Capture Screen
tWRWR_dd 7 0
tWRWR_sg 6 0
tWRWR_dg 4 0
tWRRD_dr 6 0
tWRRD_dd 6 0
tWRRD_sg 28 0
tWRRD_dg 23 0
tRDWR_dr 10 0
tRDWR_dd 11 0
tRDWR_sg 10 0
tRDWR_dg 10 0
DllBwEn [0] 0
DllBwEn [1] 1
DllBwEn [2] 2
DllBwEn [3] 2
EDRAM Ratio Auto
Retrain on Fast Fail Enabled
Enable RH Prevention Disabled
Exit On Failure (MRC) Enabled
MC Lock Enabled
Ch Hash Support Enabled
Strong Weak Leaker 7
Memory Scrambler Enabled
Force Single Rank Disabled
Memory Remap Enabled
Fast Boot Enabled
DLL Weak Lock Support Enabled
Memory Thermal Management Disabled
DDR PowerDown and idle counter BIOS
REFRESH_ 2X_MODE Disabled
SelfRrefresh Enable Enabled
Memory Profiles (Automatic)
This item enables you to set the memory profiles. The selection of memory profiles
impacts memory sizing beha
vior.
EDRAM Ratio (Auto)
Use this item to set the EDRAM Ratio.
Retrain on Fast Fail (Enabled)
Use this item to enable or disable the retrain on fast fail.
Enable RH Prevention (Disabled)
Use this item to enable or disable the RH prevention.
Exit On Failure (MRC) (Enabled)
Use this item to enable or disable the exit on failure (MRC).
Ch Hash Support (Enabled)
Use this item to enable or disable the Ch Hash support.
Mc Lock (Enabled)
This item allows you to enable or disable capacity to lock MC registers or not.
To Next Page
Loading...
Need help?
General
