Chapter 3
H110I-C4P USER MANUAL
55
Strong Weak Leaker (7)
Use this item to set the strong weak leaker value.
Force Single Rank (Disabled)
Use this item to enable or disable the force single rank.
SelfRefresh Enable (Enabled)
Use this item to enable or disable the SelfRefresh.
Memory Scrambler (Enabled)
This item allows you to enable or disable the memory scrambler.
Fast Boot (Enabled)
This item allows you to enable or disable the fast boot.
Memory Remap (Enabled)
This item allows you to enable or disable the memory remap above 4G.
Memory Thermal Management (Disabled)
This item allows you to enable or disable the memory thermal management.
DDR PowerDown and idle counter (BIOS)
This item allows you to BIOS or PCODE the DDR Power Down and idle counter. BIOS:
BIOS is in countrol of DDR CKE mode and idle timer value. PCODE: pcode will
manage the modes.
REFRESH_2X_MODE (Disabled)
This item allows you to enable or disable 2xRef when warm and Hot 2-iMC enables
2xRef when Hot.
DLL Weak Lock Support (Enabled)
This item allows you to enable or disable the DLL weak lock support.
Press <Esc> to return to the Tweak Menu page.
To Next Page
Loading...
Need help?
General
