Chapter 3
H110I-C4P USER MANUAL
56
Processor Speed (2700 MHz)
This item shows the CPU speed.
Memory Frequency (2133 MHz)
This item shows the memory frequency.
Total Memory (4096 MB)
This item shows the total memory.
When end-users encounter failure after attempting over-clocking, please take the
following steps to recover from it.
1. Shut down the computer.
2. Press and hold the “Page Up Key (PgUp)” of the keyboard, and then boot the PC
up.
3. Two seconds after the PC boots up, release the “Page Up Key (PgUp)”.
4. The BIOS returns to the default setting by itself.
Warning: Over-clocking components can adversely affect the reliability of
the system and introduce errors into your system. Over-clocking can
permanently damage the motherboard by generating excess heat in
components that are run beyond the rated limits.
Fail-Safe Procedures for Over-clocking
Intel(R) Core(TM) i5-6600T CPU @ 2.70GHz
This is display-only field and displays the information of the CPU installed in your
computer.
EIST (Enabled)
This item allows users to enable or disable the EIST (Enhanced Intel SpeedStep
T
echnology).
Turbo Boost (Enabled)
This item allows you to enable or disable the Turbo Boost.
To Next Page
Loading...
Need help?
General
