38
Using BIOS
Parallel Port Configuration
Scroll to this item and press <Enter> and view the following screen.
Parallel Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=378h; IRQ=5; DMA=3)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
+/- :Change Opt.
Enter : Select
:Select Screen
:Select Item
Parallel Port Configuration
Parallel Port Enabled]
Device Settings IO=378h; IRQ=5; DMA=3
Change Settings [Auto]
Device Mode [ECP Mode]
F1:General Help
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
Enable or Disable Parallel
Port (LPT/LPTE)
Main Advanced Chipset M.I.B III Boot Security Save & Exit
Device Mode (ECP Mode)
This item allows you to select the device mode for a better operation environment.
Press <Esc> to return to the Super IO Configuration page.
To Next Page
Loading...
