ECS H61H2-A

37
Using BIOS
Super IO Configuration
Scroll to this item and press <Enter> to view the following screen:
Super IO Chip (IT8728)
This item shows the information of the super IO chip.
+/- :Change Opt.
Enter : Select


:Select Screen
:Select Item
Super IO Configuration
Super IO Chip IT8728
Serial Port 0 Configuration
Parallel Port Configuration
F1:General Help
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
Set Parameters of Serial Port
0 (COMA)
Main Advanced Chipset M.I.B III Boot Security Save & Exit


+/- :Change Opt.
Enter : Select


:Select Screen
:Select Item
Serial Port 0 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4;
Change Settings [Auto]
F1:General Help
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
Enable or Disable Serial Port
(COM)
Main Advanced Chipset M.I.B III Boot Security Save & Exit
Press <Esc> to return to the Super IO Configuration page.
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=3F8h; IRQ=4)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.