ECS H61H2-A

29
Using BIOS
Onboard LAN Controller (Enabled)
Use this item to enable or disable the Onboard LAN.
Press <Esc> to return to the Advanced Menu page.
ECS eJIFFY Function
ECS eJIFFY Function [Disabled]
Make sure that the eJIFFY has
been installed to hard disk.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset M.I.B III Boot Security Save & Exit
Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
ECS eJIFFY Function
Scroll to this item and press <Enter> to view the following screen:
ECS eJIFFY Function (Disabled)
This item allows you to enable or disable ECS eJIFFY Function.
Press <Esc> to return to the Advanced Menu page.
+/- : Change Opt.
Enter : Select
F1:General Help


:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
PC Health Status
On motherboards support hardware monitoring, this item lets you monitor the
paeameters for critical voltages, temperatures and fan speeds.
-=- PECI Mode -=-
Offset to TCC Activation Temp : -27
System Temperature : 30°C
CPU Fan Speed : 2934 RPM
CPU Voltage : 1.260V
AXG Voltage : 1.104V
DIMM Voltage : 1.548V
PCH Voltage : 1.056V
Smart Fan Function

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
-=- PECI Mode -=-
Offset to TCC Activation Temp : -50
Main Advanced Chipset M.I.B III Boot Security Save & Exit
Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
+/- :Change Opt.
Enter : Select
F1:General Help


:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
PC Health Status