1-6
6. IEEE 1394a controller
The IEEE 1394a controller provides high-speed and flexible
PC connectivity to a wide range of peripherals and devices compliant
to IEEE 1394a standards. The IEEE 1394a interface allows up to
400Mbps tranfer rates.
7. Flash ROM
This 4Mb ROM contains the programmable BIOS program.
12. Gigabit LAN controller
The Gigabit LAN controller delivers transfer rates up to 10/100/
1000Mbps Ethernet connection. Ideal for handling large amounts of
data such as video, audio and voice.
13. 10/100Mbps LAN PHY
A. Anti-Burn LED indicator
When this LED is light up, do not remove the memory module from
your DIMM slot or else your memory module will be damaged.
B. AGP A.I indicator
C. PCI LED indicator
8. Super I/O (ITE 8705F) controller
This Super I/O provides the commonly used functionality. The chipset
supports a high performance floppy disk controller, a multimode parallel
port, one serial port, a game port, the mouse and keyboard interface.
11. AGP Slot
This Accelerated Graphics Port (AGP) slot supports AGP 8X
and 4X mode graphic cards for 3D graphical applications.
The 10/100Mbps LAN PHY delivers a transfer rates up to 10/100
Mbps.
These two LEDs indicate which type of graphics card you have in-
stalled.
4X- Yellow LED; 8X-Blue LED
The blinking PCI LED indicates the PCI slot activity. These LEDs will
stop blinking when add card has been installed. Blinking means no add
card installed or add card was not properly installed.
9. Audio CODEC
The audio CODEC is compliant with AC’97 v2.3 spec and supports
6-channel audio.
10. PCI slots
These five 32-bit PCI 2.2 expansion slots support bus master PCI
cards like SCSI or LAN cards with 133MB/s maximum throughput.
To Next Page
Loading...
Need help?
General
