5-10
The InstallShield Wizard will begin automatically for installation. Click
on the Next button to proceed the installation in the welcoming window.
5.3 Using VIA RAID Tool
Put a check mark in the check box to install the feature you want. Then click
Next button to proceed the installation.
Once the installation is complete, go to Start---> Programs---> VIA--->
raid_tool.exe to enable VIA RAID Tool.
After the software is finished installation, it
will automatically started every time Windows
is initiated. You may double-click on the
icon shown in the system tray of the tool
bar to launch the VIA RAID Tool utility.
To Next Page
Loading...
