ECS Mainboard User Manual

27
Power
Management
Use this item to enable or disable a power
management scheme. If you enable power
management, you can use the items below
to set the power management operation.
Both APM and ACPI are supported.
Suspend Mode
This item selects the status S1(Stop Clock)
or S3(Suspend to RAM) when the system
enters the power-saving Suspend mode.
Suspend Time
Out
This item sets up the timeout for Suspend
mode in minutes. If the time selected passes
without any system activity, the computer
will enter power-saving Suspend mode.
Resume On
RTC Alarm
The system can be turned off with a
software command. If you enable this item,
the system can automatically resume at a
fixed time based on the system’s RTC
(realtime clock). Use the items below this
one to set the date and time of the wake-up
alarm. You must use an ATX power supply
in order to use this feature.
Keyboard
Power On
If you enable this item, the system can
automatically resume by pressing hot keys
on the keyboard or typing in the password.
You must enable the Keyboard Power On
jumper and use an ATX power supply in
order to use this feature.
LAN/Ring
Power On
Your system can enter the software power
down. If you enable this item, the system
can automatically resume if there is traffic
on the network adapter.
USB Device
Power On
If you enable this item, the system can
automatically resume by using the USB
device.

ECS Mainboard Specifications

General

Brand	ECS
Model	Mainboard
Category	Motherboard
Language	English