ECS Mainboard - Mainboard Key Features; Socket-478 Processor Support; Chipset and Architecture; DDR SDRAM Memory Support

2
Key Features
This mainboard has these key features:
Socket-478 Processor
♦ Supports Intel Pentium 4 series CPU with Hyper
Threading Technology
♦ Supports up to 800 MHz Front-Side Bus
Hyper-Threading technology enables the operating
system into thinking it’s hooked up to two processors,
allowing two threads to be run in parallel, both on
separate ‘logical’ processors within the same physical
processor.
Chipset
There are SiS661FX Northbridge and SiS963L Southbridge in the
chipsets in accordance with an innovative and scalable architecture
with proven reliability and performance.
♦ Integrated A.G.P. Compliant Target/66Mhz Host-to-PCI
Bridge: Universal AGP v3.0 Compliant and supports AGP
8X/4X Interface w/ Fast Write Transaction
♦ Built-in a high performance 256-bit 3D engine and 32-bit
floating point format VLIW triangle setup engine
♦ Integrated Multi-threaded I/O link ensures concurrency of
upstream/down stream data transfer with 1.2GB/s
bandwidth
♦ PCI 2.2 Specification Compliance
♦ Integrated Multithreaded IO Link Mastering
♦ Multithread I/O link Mastering with Read/Write
Concurrent transaction
Memory Support
♦ Two 184-pin DIMM sockets for DDR SDRAM memory
modules
♦ Supports DDR400 memory bus
♦ Maximum installed memory is 2GB