ECS NM70-M - Connecting Case Components

Chapter 2
21
NM70-M USER MANUAL
After you have installed the motherboard into a case, you can begin connecting the
motherboard components. Refer to the following:
2-4-5. Connecting Case Components
No. Components
1SYS_FAN
2CPU_FAN
3ATX_POWER
4 F_PANEL
1 & 2. SYS_FAN (System Cooling FAN Connector) & CPU_FAN (CPU Cooling FAN
Connector)
Users please note that the fan connector supports the CPU cooling fan of 1.1A
~ 2.2A (26.4W max) at +12V.
Connect the CPU cooling fan cable to CPU_FAN.
Connect the system cooling fan connector to SYS_FAN.