Chapter 3
NM70-M USER MANUAL
35
CPU Configuration
The item in the menu shows the CPU Configuration.
Intel(R) Celeron(R) CPU 847 @ 1.10GHz
This is display-only field and diaplays the information of the CPU installed in your
computer.
64-bit (Supported)
This item shows the computer supports EMT64.
Processor Speed (1100MHz)
This item shows the current processor speed.
Processor Stepping (206a7)
This item shows the processor stepping version.
Microcode Revision (28)
This item shows the Microcode version.
Processor Cores (2)
This item shows the core number of the processor.
Intel HT Technology (Not Supported)
This item shows that the computer supports Intel HT Technology or not.
Intel VT-x Technology (Supported)
This item shows that the computer supports Intel VT-x Technology or not.
CPU Configuration
Intel(R) Celeron(R) CPU 847 @ 1.10GHz
64-bit Supported
Processor Speed 1100 MHz
Processor Stepping 206a7
Microcode Revision 28
Processor Cores 2
Intel HT Technology Not Supported
Intel VT-x Technology Supported
Active Processor Cores [All]
Limit CPUID Maximum [Disabled]
Execute Disable Bit [Enabled]
Intel Virtualization Technology [Enabled]
EIST [Enabled]
CPU C3 Report [Enabled]
CPU C6 Report [Enabled]
Enhanced Halt (ClE) [Enabled]
Configurable TDP [TDP NOMINAL]
Long duration power limit 0
Long duration power maintained 0
Short duration power limit 0
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
Number of cores to enable in
each processor package.
Main Advanced Chipset Tweak Boot Security Exit
F1:General Help
+/- : Change Opt.
Enter : Select
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
*
T
* This picture takes CPU 847 for reference only, please refer to the actual
motherboard as standard.
To Next Page
Loading...
Need help?
General
