EDAN F9 User Manual

F9, F9 Express Fetal & Maternal Monitor User Manual Fetal Monitoring
- 98 -
7.7.2 Enabling or Disabling AFM Monitoring
To enable or disable AFM monitoring,
1 Select the setup key on the main interface.
2 Select Fetus > AFM.
3 Select ON or OFF (default).
4 Select OK.
7.7.3 Choosing AFM Mode
When AFM monitoring is enabled, the AFM monitoring result is displayed either in the form of a
trace or black marks. The x-axis of each wave or each black mark indicates the duration of a
detected fetal movement.
To choose AFM mode,
1 Select the setup key on the main interface.
2 Select Fetus > AFM Mode.
3 Select Trace (default) or Black Mark.
4 Select OK.
7.7.4 Choosing FM Source
When AFM monitoring is enabled, the FM has two sources: AFM and MFM.
To choose the FM source,
1 Select the setup key on the main interface.
2 Select Fetus > FM Source.
3 Select MFM (default) or AFM.
4 Select OK.
7.7.5 Manual Fetal Movement (MFM) Monitoring
MFM result comes from the patient‟s feeling of fetal movement. The count will be displayed on
Trace
Black Mark

EDAN F9 Specifications

General

Brand	EDAN
Model	F9
Category	Medical Equipment
Language	English