EDAN SE-1200 Express - Activating SCP;FDA-XML;DICOM;VCG Function

SE-1200 Series Electrocardiograph Service Manual Optional and Advanced Functions
- 23 -
1. When the Advanced Setup screen is displayed, press Tab or Shift + Tab, or the Up, Down,
Left or Right arrow to move the cursor to Function, and then press Enter to open the
Function window.
2. Press Tab or Shift + Tab to move the cursor to the Activate button after the function is
activated. Press Enter to open the Activate Password window. Enter the password and press
Enter to activate the function.
NOTE:
1. Please contact local distributors to get the service password and the activating
password.
2. VCG is an optional function only for SE-1200 Express.
4.3 Implementing FTP Protocol
1. Configuring the PC
1) Insert the original operating system CD, and click on Start-> Control Panel-> Add or
Remove Programs.