Technical manual C1P2FXBT – V1.7 p 5/28
Information and Recommendations
o Pursuant to European directive UTE C00-200, incorporating directives 89/336 EEC and
92/31 EEC, C1P2FX complies with the following standards:
1. NF EN 50081-1 governing electromagnetic radiation, and
2. NF EN 50082-1 governing electromagnetic susceptibility.
o Cabling recommendations: the cables used to connect readers, the network, and other
peripherals must be installed in accordance with the instructions for Level 2 (protected environ-
ment) of standard NF EN 61000-4-4.
o This product must be installed by an approved company. Incorrect installation and use
may result in electric shock or fire. Before installation, read the technical information and comply
with the recommendations for installing the product.
o Once the power is turned off, all the internal capacitors will discharge themselves to a
safe level after 60 seconds under normal conditions. However, in the event of a power
failure, the charge may be maintained for much longer and suitable precautions should
be taken before handling the product.
To Next Page
Loading...