Edge-Core ECS4620-28F-2AC - Show Running-Config

Chapter 4 | System Management Commands
System Status
– 131 –
L2MCAST_GROUP 0.00 0.00 0.00
L2MUX_GROUP 0.00 0.00 0.00
L4_GROUP 0.00 0.00 0.00
LACP_GROUP 0.00 0.00 0.00
MSL_TD 0.00 0.00 0.00
NETACCESS_GROUP 0.00 0.00 0.00
NETACCESS_NMTR 0.00 0.25 2.00
NETCFG_GROUP 0.00 0.00 0.00
NETCFG_PROC 0.00 0.08 1.00
NIC 0.00 0.00 0.00
NMTRDRV 1.00 1.66 4.00
NSM_GROUP 0.00 0.00 0.00
NSM_PROC 0.00 0.00 0.00
NSM_TD 0.00 0.00 0.00
OSPF6_TD 0.00 0.00 0.00
OSPF_TD 0.00 0.00 0.00
PIM_GROUP 0.00 0.00 0.00
PIM_PROC 0.00 0.00 0.00
PIM_SM_TD 0.00 0.00 0.00
POE_PROC 0.00 0.00 0.00
RIP_TD 0.00 0.00 0.00
SNMP_GROUP 0.00 0.00 0.00
SNMP_TD 0.00 0.00 0.00
SSH_GROUP 0.00 0.00 0.00
SSH_TD 0.00 0.00 0.00
STA_GROUP 0.00 0.00 0.00
STKCTRL_GROUP 0.00 0.00 0.00
STKTPLG_GROUP 0.00 0.00 0.00
SWCTRL_GROUP 0.00 0.00 0.00
SWCTRL_TD 0.00 0.00 0.00
SWDRV_MONITOR 21.00 19.25 21.00
SYS_MGMT_PROC 0.00 0.00 0.00
SYSDRV 0.00 0.00 0.00
SYSLOG_TD 0.00 0.00 0.00
SYSMGMT_GROUP 0.00 0.00 0.00
SYSTEM 0.00 0.00 0.00
UDLD_GROUP 0.00 0.00 0.00
WTDOG_PROC 0.00 0.00 0.00
XFER_GROUP 0.00 0.00 0.00
XFER_TD 0.00 0.00 0.00
Console#
show running-config This command displays the configuration information currently in use.
Syntax
show running-config [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-28/52)