Chapter 5
| SNMP Commands
SNMPv3 Commands
– 220 –
show snmp user This command shows information on SNMP users.
Command Mode
Privileged Exec
Example
Console#show snmp user
Engine ID : 800001030300e00c0000fd0000
User Name : steve
Group Name : rd
Security Model : v1
Authentication Protocol : None
Privacy Protocol : None
Storage Type : Nonvolatile
Row Status : Active
SNMP remote user
Engine ID : 0000937564846450000
User Name : mark
Group Name : public
Security Model : v3
Security Level : Anthentication and privacy
Authentication Protocol : MD5
Privacy Protocol : DES56
Storage Type : Nonvolatile
Row Status : Active
Console#
Write View The associated write view.
Notify View The associated notify view.
Storage Type The storage type for this entry.
Row Status The row status of this entry.
Table 31: show snmp group - display description
Field Description
Table 32: show snmp user - display description
Field Description
Engine ID String identifying the engine ID.
User Name Name of user connecting to the SNMP agent.
Group Name Name of an SNMP group.
Security Model The user security model: SNMP v1, v2c or v3.
Security Level Indicates if authentication or encryption are used.
Authentication Protocol The authentication protocol used with SNMPv3.
Privacy Protocol The privacy protocol used with SNMPv3.
Storage Type The storage type for this entry.
To Next Page
Loading...
Need help?
General