Chapter 8
| Authentication Commands
AAA
– 259 –
default - Specifies the default accounting method for service requests.
method-name - Specifies an accounting method for service requests.
(Range: 1-64 characters)
start-stop - Records accounting from starting point and stopping point.
group - Specifies the server group to use.
tacacs+ - Specifies all TACACS+ hosts configured with the tacacs-server
host command.
server-group - Specifies the name of a server group configured with the
aaa group server command. (Range:1-64characters)
Default Setting
Accounting is not enabled
No servers are specified
Command Mode
Global Configuration
Command Usage
◆ The accounting of Exec mode commands is only supported by TACACS+
servers.
◆ Note that the default and method-name fields are only used to describe the
accounting method(s) configured on the specified TACACS+ server, and do not
actually send any information to the server about the methods to use.
Example
Console(config)#aaa accounting commands 15 default start-stop group tacacs+
Console(config)#
aaa accounting dot1x This command enables the accounting of requested 802.1X services for network
access. Use the no form to disable the accounting service.
Syntax
aaa accounting dot1x {default | method-name}
start-stop group {radius | tacacs+ |server-group}
no aaa accounting dot1x {default | method-name}
default - Specifies the default accounting method for service requests.
method-name - Specifies an accounting method for service requests.
(Range: 1-64 characters)
start-stop - Records accounting from starting point and stopping point.
To Next Page
Loading...
