Edge-Core ECS4620-28F-2AC Cli Reference Guide

Chapter 9 | General Security Measures
Network Access (MAC Address Authentication)
– 320 –
mac-authentication
reauth-time
Use this command to set the time period after which a connected MAC address
must be re-authenticated. Use the no form of this command to restore the default
value.
Syntax
mac-authentication reauth-time seconds
no mac-authentication reauth-time
seconds - The reauthentication time period. (Range: 120-1000000 seconds)
Default Setting
1800
Command Mode
Global Configuration
Command Usage
◆ The reauthentication time is a global setting and applies to all ports.
◆ When the reauthentication time expires for a secure MAC address it is
reauthenticated with the RADIUS server. During the reauthentication process
traffic through the port remains unaffected.
Example
Console(config)#mac-authentication reauth-time 300
Console(config)#
network-access
dynamic-qos
Use this command to enable the dynamic QoS feature for an authenticated port.
Use the no form to restore the default.
Syntax
[no] network-access dynamic-qos
Default Setting
Disabled
Command Mode
Interface Configuration
Command Usage
◆ The RADIUS server may optionally return dynamic QoS assignments to be
applied to a switch port for an authenticated user. The “Filter-ID” attribute

Edge-Core ECS4620-28F-2AC Specifications

General

Model	ECS4620-28F-2AC
Ports	28
SFP Ports	24
Power over Ethernet (PoE)	No
Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Layer	L2/L3
MAC Address Table Size	16K
VLANs	4K
Weight	3.5 kg
Operating Temperature	0°C to 50°C
Storage Temperature	-40°C to 70°C
Type	Switch
10G SFP+ Ports	4
Power Supply	AC: 100~240VAC, 50/60 Hz
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1Q, IEEE 802.1P, IEEE 802.1D, IEEE 802.1S, IEEE 802.1W