VP3302 IP Phone User Manual
“DOWN Æ” KEY
When the IP phone is entered into the menu selection, this key is used to
scroll down menu items.
And when the IP phone is editing menu item’s contents, this key is used as
“right shift” to shift the cursor right a digit per each key press.
4. - IN VOL. +
When the IP phone is in an idle state or the handset or speaker is being used,
this key is used to increase/decrease the volume of the voice sound.
The volume of the speaker, handset and ring are separately adjusted
according to the mode of current usage. When in idle, “+” key increases the
volume of the ring tone, “-” key decreases the volume of the ring tone; in
hand-free mode, “+” key increases the volume of the speaker, “-” key
decreases the volume of the speaker; when in handset mode, “+” key
increases the volume of the handset, “-” key decreases the volume of the
handset.
5. + OU
sers are able to increase/decrease the volume which is sent out to the
remote party.
6. S
This key is pressed to switch between the usage of the handset and the
7. HOLD
rsation.
ssed to do a consultant-transfer of an active call to
phone. When the IP phone is active (incoming call is answered or
another party and have a
conversation with him. Then, by pressing the “TRANSFER” key, the call
T VOL. -
U
PEAKER
speaker.
Holds the conve
This key can also be pre
another IP
outgoing call is accepted), by pressing this key, a dial tone will be heard,
then the user can key in the IP phone number of
will be transferred to this new party.
www.edge-core.com
10
To Next Page
Loading...
General