EdgeStar AFR151SS - Display Board Board & Control Board; Power Board & Transformer

- 15 -
3. DISASSEMBLY
3-8 DISPLAY BOARD & CONTROL BOARD
(Models：AFR151SSOD, AFR151SS, ABR151SG,
AWC151SZ, , ABR241SG, AWC241SZ, AFR241SS,
AFR241SSOD, AWC241TSZ, AWC241FD)
1. Loosen four screws.
2. Pull out the electrical box.
3.
Unplug all cable connectors. (figure 14)
screw
Figure 14
4. Loosen four screws. (figure 15)
screw
Figure 15
5. The control board is pictured below. (figure 16)
Figure 16
6. Remove the display cover. Pull out the display board support
and find out the display board inside it. (figure 17)
Figure 17
7. The display board is like below. (figure 18)
Figure 18
3-9 POWER BOARD & TRANSFORMER
(Models： ABR241SG, AWC241SZ, AFR241SS,
AFR241SSOD, AWC241TSZ, AWC241FD)
1. Loosen three screws. (figure 19)
Figure 19
2. The power board & transformer are like below. (figure 20)
Figure 20