To Next PageTo Next PageWhat to do if my EdgeStar BIDW1802BL shows error E1?
If your EdgeStar Dishwasher displays the E1 error, it indicates a potential issue with the water supply. First, ensure that the water supply is fully open. Then, verify that the water pressure meets the dishwasher's requirements. Also, inspect the water inlet for any restrictions or kinks that may be impeding water flow.
Why does my EdgeStar BIDW1802BL show error code E3?
If your EdgeStar Dishwasher displays error code E3, this suggests a possible malfunction of the heating element. To resolve this, check the heating element to ensure it is functioning correctly.
What to do if my EdgeStar BIDW1802BL Dishwasher displays error E4?
If your EdgeStar Dishwasher displays error code E4, check for any signs of leaks and inspect the dishwasher for overflow.
How to fix LSb error on EdgeStar BIDW1802BL?
If your EdgeStar Dishwasher displays the LSb error, refill the rinse aid dispenser.
Why are my dishes not getting cleaned in my EdgeStar Dishwasher?
If your EdgeStar Dishwasher isn't cleaning dishes properly, several factors could be at play. First, ensure dishes are loaded correctly, referring to the loading guidelines. Select a more intensive wash cycle for better cleaning. Insufficient detergent can also be a culprit, so try using more detergent or switching brands. Check that items aren't blocking the spray arms, preventing their full rotation. Lastly, verify that the filter combination at the dishwasher's base is clean and correctly installed.
How to improve drying performance in my EdgeStar Dishwasher?
Several factors can cause dishes not to dry in your EdgeStar Dishwasher. Improper loading can prevent effective drying, so re-load the dishwasher according to the instructions. Insufficient rinse aid can also be a cause; refill and/or increase the amount of rinse aid used. Avoid removing dishes too soon after the cycle ends. Selecting the wrong cycle, such as a short cycle, can also affect drying performance, so choose a more intensive cycle. Finally, cutlery with a low-quality coating may not be suitable for dishwashers.
What to do if my EdgeStar BIDW1802BL Dishwasher leaves cloudiness on glassware?
Cloudiness on glassware in your EdgeStar Dishwasher can result from a combination of using too much detergent with soft water; try using less detergent or selecting the shortest wash cycle for glassware. Another cause could be a dusty or blocked filter; clean the filter, and replace it if necessary.
Why is detergent left in the dispenser cup of my EdgeStar Dishwasher?
If detergent is left in the dispenser cup of your EdgeStar Dishwasher, it may be because dishes are blocking the detergent cups. Re-load the dishwasher according to the instructions in this manual.
How to remove black or gray marks from dishes in my EdgeStar Dishwasher?
Black or gray marks on dishes from your EdgeStar Dishwasher may occur if utensils have rubbed against the dishes. Use a mild abrasive cleaner to eliminate the marks and ensure you load the dishwasher carefully.
General| Model Number | BIDW1802BL |
|---|---|
| Number of Wash Cycles | 6 |
| Decibel Level | 52 dB |
| Noise Level | 52 dB |
| Energy Star Certified | Yes |
| Color | Black |
| Installation | Built-In |
| Voltage | 120V |
| Frequency | 60 Hz |
| Type | Built-In |
| Cycles | 6 |
| Dimensions (H x W x D) | 34.63 x 23.63 x 24.5 inches |
