Why is there a rattling noise inside my EdgeStar Dishwasher?
A rattling noise inside your EdgeStar Dishwasher usually means an item isn't securely placed in the dish rack. Pause the wash cycle and secure the items.
What causes a knocking noise inside my EdgeStar DWP62SV?
A knocking noise inside your EdgeStar Dishwasher indicates that the spray arm is hitting an item in the dish rack. Pause the wash cycle and rearrange the items obstructing the spray arm's movement.
How to remove black or gray marks on dishes from EdgeStar DWP62SV?
If you find black or gray marks on dishes from your EdgeStar Dishwasher, it may be due to utensils rubbing against the dishes. Use a mild abrasive cleaner to remove the marks and load the dishwasher carefully.
Why are there suds in my EdgeStar DWP62SV?
Suds in your EdgeStar Dishwasher tub can be due to using the wrong detergent. Only use the specified detergent. If you've used the wrong detergent, open the dishwasher to let the suds evaporate. Add 1 gallon of cold water to the tub, then close and latch the door. Start the “RINSE” wash cycle to drain the water, repeating if necessary. Also, always clean up rinse aid spills immediately.
What to do if water is not pumped from EdgeStar Dishwasher?
If your EdgeStar Dishwasher isn't pumping water out, begin by inspecting the drain hose for any kinks. Also, check the coarse filter for any clogs. Finally, ensure that your kitchen sink is draining correctly; if it isn't, you may need to consult a plumber.
Why is there cloudiness on glassware after using my EdgeStar DWP62SV Dishwasher?
Cloudiness on glassware from your EdgeStar Dishwasher can result from using too much detergent with soft water; try using less detergent or selecting a shorter wash cycle. Also, the filter may be dusty or blocked, so clean the filter and replace it if needed.
Why are the dishes still wet after using my EdgeStar DWP62SV Dishwasher?
Several factors can cause dishes to remain wet after a cycle in your EdgeStar Dishwasher. Check if the dishwasher has been loaded improperly, reload it according to instructions. Ensure that there is enough rinse aid. Avoid removing dishes too soon. Note that short cycles may have lower cleaning performance, select a more intensive cycle. Be aware that the dishwasher is not suitable for low-quality coating cutlery.
Why are dishes not cleaned in my EdgeStar DWP62SV Dishwasher?
If your EdgeStar Dishwasher leaves dishes unclean, consider these points: Ensure dishes are loaded properly, following the guidelines. Select a more powerful wash cycle. Use more detergent or switch to a different brand. Rearrange items blocking the spray arms. Lastly, verify that the filter combination at the dishwasher's base is clean and correctly installed.
General| Model Number | DWP62SV |
|---|---|
| Capacity | 6 Place Settings |
| Noise Level | 52 dB |
| Wash Cycles | 6 |
| Control Type | Electronic |
| Color | Silver |
| Voltage | 120V |
| Energy Star Certified | Yes |
| Type | Portable |
| Water Consumption | 3.5 Gallons |
| Wattage | 1200 Watts |
Details precautions for electrical connection, grounding, power supply, and maintenance to prevent shock hazards.
Covers installation, repair, intended use, child supervision, door safety, detergent use, and item placement for safe operation.
Details necessary clearance, water supply, pressure, and temperature specifications for proper dishwasher installation.
Specifies requirements for a grounded outlet, circuit rating, and cautions against using extension cords or removing the ground prong.
Step-by-step guide to connecting the inlet and drain hoses using the provided faucet adapter and quick connect assembly.
Explains the purpose of each button (Power, Program Selector, Delay, Start/Pause) and indicator light on the control panel.
Guides on how to load cups, glasses, bowls, plates, and cutlery for optimal cleaning and to prevent interference with spray arms.
Explains the three parts of the filter system and the process for regular cleaning to ensure optimal performance and prevent clogs.
Addresses common problems like the unit not starting, water not pumping, suds in the tub, and internal stains with solutions.
Outlines what is covered under the one-year parts and 90-day labor warranty, including limitations and exclusions.
Provides instructions on how to contact customer support, the return process, and responsibilities for obtaining warranty service.
To Next Page
