12
6. Print Server Installation
This server provides a Print Server Setup tool for you to add the network port
of the server to your computer automatically. After you have added the
network port, you can run the standard “Add Printers” procedures in the
Windows to install the printer with the print server.
The program can be performed on Windows 98SE/Me/2000/XP/2003 with the
same user interface. Before installation, please confirm that your PC has
already connected to the network and installed TCP/IP network protocol.
Please follow the steps below to start installation.
1. Insert the CD shipped along with the server into your CD-ROM drive. The
Autorun.exe program should be executed automatically. If not, run
Autorun.exe manually from “Autorun” folder in the CD.
2. The following screen will be displayed. Click “Print Server Utility”.
To Next Page
Loading...
