D2 Leveling the Printing Bed(Continued)
•
When using Auto-Leveling
1. Place the A4 size paper first before using Auto-leveling
functions. Select Utilities > Auto-Leveling in the display menu.
Leveling the Printing Bed and Filament Loading
NOTE :
The thickness of A4 size paper is about 0.1mm and this paper is used in
leveling the bed to keep 0.1mm space between the nozzle and the printing
bed.
2. When the extruder comes to the center, adjust 4 round knobs
while trying to pull forward the A4 paper to verify the space as
the same manner as Standard Leveling (See item 4 in page 13).
3. Insert the SD Card on the top of the printer and select the file
on LCD panel. It starts to print with auto leveling function.
NOTE :
• In case of using Auto-Leveling, it is okay to level the center of the
printing bed only before use unlike Standard Leveling.
• It is recommendable to use Standard Leveling one time in 10 times of
Auto-leveling, or when physical shock occurs to the printing bed.
bed.
∃DISON PRO User Manual V.1 14
on LCD panel. It starts to print with auto leveling function.
NOTE :
In CreatorK, check the mark in the Auto-leveling item when generating
Gcode.
To Next Page
Loading...
General