Declaration of Conformity
We, Edwards Limited,
Crawley Business Quarter,
Manor Royal,
Crawley,
West Sussex, RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised to
assemble the technical file, that the product(s)
nXDS6i scroll pump 100-127/200-240V, 50/60Hz A735-01-983
nXDS10i scroll pump 100-127/200-240V, 50/60Hz A736-01-983
nXDS15i scroll pump 100-127/200-240V, 50/60Hz A737-01-983
nXDS20i scroll pump 100-127/200-240V, 50/60Hz A738-01-983
nXDS6iC scroll pump 100-127/200-240V, 50/60Hz A735-02-983
nXDS10iC scroll pump 100-127/200-240V, 50/60Hz A736-02-983
nXDS15iC scroll pump 100-127/200-240V, 50/60Hz A737-02-983
nXDS20iC scroll pump 100-127/200-240V, 50/60Hz A738-02-983
nXDS6iR scroll pump 100-127/200-240V, 50/60Hz A735-03-983
nXDS10iR scroll pump 100-127/200-240V, 50/60Hz A736-03-983
nXDS15iR scroll pump 100-127/200-240V, 50/60Hz A737-03-983
nXDS20iR scroll pump 100-127/200-240V, 50/60Hz A738-03-983
to which this declaration relates is in conformity with the following standard(s) or other normative
document(s)
EN1012-2:1996+A1:2009 Compressors and Vacuum Pumps - Safety Requirements – Part 2
Vacuum Pumps
EN61010-1:2010 Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use. General Requirements
EN61326-1:2013 Electrical equipment for measurement, control and laboratory Use.
(Class A Emissions, EMC requirements. General requirements
Industrial Immunity)
EN50581:2012 Technical Documentation for the Assessment of Electrical and
Electronic
Products with respect to the Restriction of Hazardous Substances
EN13463-1:2009 Non-electrical equipment for use in potentially explosive
atmospheres. Basic method and requirements
EN13463-5:2011 Non-electrical equipment for use in potentially explosive
atmospheres. Protection by constructional safety ‘c’
CAN/CSA-C22.2 No.61010.1-04 Safety Requirements for electrical equipment for Measurement,
Control and Laboratory Use, Part 1: General requirements
UL61010-1, 2nd Edition Safety Requirements for electrical equipment for Measurement,
Control and Laboratory Use, Part 1: General requirements
and fulfils all the relevant provisions of
2006/42/EC Machinery Directive
2014/35/EU Low Voltage Directive
2014/30/EU Electromagnetic Compatibility (EMC) Directive
2014/34/EU ATEX Directive on use in Potentially Explosive Atmospheres
II 3 G c IIB T4 Internal Atmospheres Only, Tech File ref MPTR 0271
2011/65/EU Restriction of Certain Hazardous Substances (RoHS) Directive
Note: This declaration covers all product serial numbers from the date this Declaration was signed
onwards.
10.08.2015, Burgess Hill
P200-06-720 Issue D
Mr Peter Meares
Senior Technical Support Manager, General Vacuum
Date and Place
This product has been manufactured under a quality
management
system
certified to ISO
9001:2008