2.2.2 Connecting using WPS (WiFi Protected Setup)
Step 1: Press the WPS button on the front of the 5GEE Router for 3
seconds and the LED will begin flashing slowly.
Step 2: Select the 5GEE Router wireless network name (SSID) with a WPS
compatible device.
Wireless network name: 5GEE-Router-XXXX
Step 3: Click connect.
Note: Connect the wireless device to the 5GEE Router wireless network
via WPS within 2 minutes of pressing the WPS button. The WPS feature
will be disabled if WiFi security is set to WPA3 or Disabled, or Broadcast
SSID is turned off.
To Next Page
Loading...
