What to do if my EemaX FlowCo SPEX3208 shows a freeze warning?
A freeze warning on your EemaX Water Heater indicates that the inlet temperature is too low (below 35°F/2°C). To resolve this, increase the temperature of the inlet water to meet product specifications.
General| Voltage | 240 V |
|---|---|
| Wattage | 3200W |
| Frequency | 50/60 Hz |
| Heating Element | Copper |
| Power | 3200W |
| Protection | Overheat protection |
| Plumbing Connection | 1/2" NPT |
Key safety precautions and guidelines for operating electrical equipment like this water heater.
Emphasizes the importance of reading and adhering to all instructions before installation or service.
Describes the Eemax FlowCo as a non-thermostatic electric tankless water heater for specific applications.
Details the dangers of hot water, scalding potential, and recommended temperature checks for safety.
Table of LED patterns, status, possible causes, and solutions for common heater issues.
Recommendations for routine cleaning of aerators and filter screens to ensure consistent water flow and performance.
List of part numbers for compression fittings used with the water heater.
Catalog of internal components and their corresponding part numbers for Eemax FlowCo models.
To Next Page