What to do if my EemaX LavAdvantage SPEX8208T Water Heater shows undervoltage?
If your EemaX Water Heater indicates undervoltage, it means the inlet voltage is too low compared to the heater's specifications. Have certified personnel check the inlet voltage and ensure it's within the specified range.
What to do if my EemaX LavAdvantage SPEX8208T has high flow?
If your EemaX Water Heater experiences high flow, the flow rate might be too high to heat the water to the setpoint temperature. Reduce the flow by using an outlet flow restrictor or a faucet aerator.
What to do if my EemaX LavAdvantage SPEX8208T shows a freeze warning?
If your EemaX Water Heater displays a freeze warning, the inlet water temperature is too low (below 35°F). Increase the inlet water temperature above 35°F to resolve this.
General| Model | SPEX8208T |
|---|---|
| Category | Water Heater |
| Brand | EemaX |
| Type | Tankless |
| Power Source | Electric |
| Power | 8.0 kW |
| Voltage | 240V |
| Phase | Single Phase |
| Activation Flow Rate | 0.4 GPM |
| Certification | ETL Listed |
| Temperature Range | 80°F - 140°F |
Provides detailed electrical specifications for different LavAdvantage models, including voltage, power, current, and wire size.
Explains how to use the control buttons on the unit for setting temperature and accessing advanced functions.
Instructions for increasing and decreasing the water temperature using the '+' and '-' buttons.
Guide to accessing and navigating advanced features like flow rate, inlet/outlet temperature, and software revision.
To Next Page
