Efco DS 2800 - Page 18

18
Italiano FrançaisEnglish
DISPOSITIVI DI TAGLIO CONSIGLIATI DISPOSITIFS DE COUPE PRÉCONISÉSRECOMMENDED CUTTING DEVICES
DS 3200 S - DS 3200 T
1. Lama di nylon 4 denti – Ø 10”/255 mm
2. Lama di nylon 3 denti – Ø 10”/255 mm
5. Disco “Pro Trim Professional” 3 lame –
Ø 12"/315 mm
6. Testina “Batti e vai” Ø 130 mm – 2 li nylon
Ø 2.4 mm
8. Testina “Multiline” Ø 2.75”/73 mm – 6 li quadrati lato
3 mm
9. Testina “Multiline” Ø 3.15”/80 mm – 8 fili
quadrati lato 3.5 mm (DS 3200T)
10. Lama per erba Ø 10”/255 mm, spessore 1.6 mm
12. Disco 3 denti Ø 10”/255 mm, spessore 1.4 mm
13. Disco 3 lame fisse Ø 10”/255 mm, spessore
1.4 mm
15. Disco 3 denti Ø 12”/305 mm, spessore 2.4 mm
16. Disco 4 denti Ø 9”/230 mm, spessore 1.4 mm
17. Disco 4 denti Ø 10”/255 mm, spessore 1.4 mm
18. Disco 8 denti Ø 9”/230 mm, spessore 1.4 mm
19. Disco 8 denti Ø 10”/255 mm, spessore 1.4 mm
25. Coltello 3 lame Ø 10”/255 mm, spessore 3 mm
ATTENZIONE - L’utilizzo di dispositivi di
taglio non approvati dal costruttore può condurre a
situazioni di pericolo.
DS 3200 S - DS 3200 T
1. Lame nylon 4 dents – Ø 10”/255 mm
2. Lame nylon 3 dents – Ø 10”/255 mm
5. Disque “Pro Trim Professional” 3 lames –
Ø 12"/315 mm
6. Tête “Tap and go” Ø 130 mm – 2 ls nylon
Ø 2.4 mm
8. Tête “Multiline” Ø 2.75”/73 mm – 6 ls carrés côté
3 mm
9. Tête “Multiline” Ø 3.15”/80 mm – 8 ls carrés côté
3.5 mm (DS 3200T)
10. Lames pour l’herbe Ø 10”/255 mm, épaisseur
1.6 mm
12. Disque 3 dents Ø 10”/255 mm, épaisseur 1.4 mm
13. Disque 3 lame xes Ø 10”/255 mm, épaisseur
1.4 mm
15. Disque 3 dents Ø 12”/305 mm, épaisseur 2.4 mm
16. Disque 4 dents Ø 9”/230 mm, épaisseur 1.4 mm
17. Disque 4 dents Ø 10”/255 mm, épaisseur 1.4 mm
18. Disque 8 dents Ø 9”/230 mm, épaisseur 1.4 mm
19. Disque 8 dents Ø 10”/255 mm, épaisseur 1.4 mm
25. Lames 3 dents Ø 10”/255 mm, épaisseur 3 mm
ATTENTION - L’utilisation d’accessoires
de coupe non approuvé par le constructeur peut
entraîner des situations à risque.
DS 3200 S - DS 3200 T
1. 4-tooth nylon blade – Ø 10”/255 mm
2. 3-tooth nylon blade – Ø 10”/255 mm
5. “Pro Trim Professional” disc 3-blade –
Ø 12"/315 mm
6. “Tap and go” head Ø 130 mm – 2 nylon lines
Ø 2.4 mm
8. “Multiline” head Ø 2.75”/73 mm – 6 square lines
3 mm sides
9. “Multiline” head Ø 3.15”/80 mm – 8 square lines
3.5 mm sides (DS 3200 T)
10. Grass blade Ø 10”/255 mm, 1.6 mm thickness
12. 3-tooth disk Ø 10”/255 mm, 1.4 mm thickness
13. 3-fixed teeth blade Ø 10”/255 mm, 1.4 mm
thickness
15. 3-tooth disk Ø 12”/305 mm, 2.4 mm thickness
16. 4-tooth disk Ø 9”/230 mm, 1.4 mm thickness
17. 4-tooth disk Ø 10”/255 mm, 1.4 mm thickness
18. 8-tooth disk Ø 9”/230 mm, 1.4 mm thickness
19. 8-tooth disk Ø 10”/255 mm, 1.4 mm thickness
25. 3-blade knife Ø 10”/255 mm, 3 mm thickness
WARNING – e use of cutting devices not
authorised by the manufacturer can generate safety
risks.
p.n.4180058
9.