EFD offers productive alternatives to traditional barrel-loading meth-
ods. Here are a few suggestions that can help keep your work area
clean, save time and reduce the chance of entrapped air in the fluid.
1. You could use the EFD #920BL barrel loader. Pack the fluid into
the 12 ounce cartridge as shown. Then place the pre-filled
cartridge into the barrel loader. Using air pressure, the barrel
loader fills the barrel (with piston) from the bottom up.
If the fluid comes packed in a 1/10 gallon (300 ml.) caulking type
cartridge, use the EFD #930BL barrel loader.
2. If you receive frozen epoxies or other fluids in medical type
syringes with a manual plunger, request our luer-to-luer fitting
#2160 to transfer the material.
Please call an EFD Product Specialist for additional assistance.
Filling the cartridge
for the barrel loader.
2/3
Maximum
Fill
EFD #920BL Barrel Loader
(Specify #930BL for pre-filled 1/10 gallon caulking tubes)
Barrel Rack
#905BR for 3cc and 5cc barrels
#910BR for 10cc, 30cc and 55cc barrels
#2160 Luer-to-luer fitting
To Next Page
Loading...
Need help?
General
