EFD 1000D User Manual

Loading the Barrel Reservoirs
Caution: Do not completely fill barrels. The optimum fill is a maximum
2/3 of the barrel capacity and 1/2 of the barrel capacity when using
the LV Barrier
™
.
If the fluid you are dispensing is pourable, take the barrel, twist on a
tip cap and pour your fluid in. If appropriate, insert the SmoothFlow
™
piston (see page 13). Carefully press the piston down until it contacts
the fluid. The barrel is now ready for use.
If you are dispensing solvents, cyanoacrylates or anaerobics, use
the LV Barrier
™
. Place barrier in the top of the barrel reservoir. Allow
air between barrier and fluid. Do not contact the barrier to the fluid.
If your fluid is thick or non-leveling, you can spoon it into the barrel
with a spatula. Or, if the fluid comes packed in a 1/10 gallon cartridge,
try loading the barrel with a caulking gun. Then, press in the
SmoothFlow
™
piston to move the fluid to the bottom of the barrel and
to remove trapped air.
2/3
Maximum
Fill
White
SmoothFlow
™
piston.
LV Barrier
™
Fill procedure for
watery-thin fluids.
1/2 maximum fill
Fill procedure with
caulking gun.
Air
Fill procedure for
pourable fluids.

EFD 1000D Specifications

General

Brand	EFD
Model	1000D
Category	Dispenser
Language	English