Effekta MKD 2000 - Buttons

UPS MKD2000/3000 XL Manual
MKD XL Series
Page 15 of 45
6.1.2 Buttons
Buttons
Function
2) Menu option
The UPS will be started by pushing this button at the
same time as the menu-down button (3) for about 3sec.
The UPS switches over to testing operation by pushing
this button at the same time as the menu-up button (4)
for about 3sec.
The acoustic alert can be stopped by pushing this button
at the same time as the menu-up button (4) during
battery backup mode (mains failure)
3) Menu-down
(cursor key)
The UPS will be started by pushing this button at the
same time as the menu-option button (2) for about 3sec.
The UPS will be switched-off by pushing this button at
the same time as the menu-up button (4) for about 3sec.
The menu (display) can be scrolled by pushing this
button separately.
4) Menu-up
(cursor key)
The UPS will be switched-off by pushing this button at
the same theme as the menu-up button (4) for about
3sec.
The UPS switches over to testing operation by pushing
this button at the same time as the menu-option button
(2) for about 3sec.
The menu (display) can be scrolled by pushing this
button separately.
Attention: if the „ON/OFF“ button is not pushed long enough, the UPS will not
be switched-on /-off completely.
If there is power supply over the fuse (assembly on the back side oft he UPS)
the loading unit will still be active after the switch-off oft he UPS.